Descrizione
Finale di potenza HiEnd a 5 canali a stato solido. Potenza 325W x 5 su 8ohm, 500W x 2 su 4ohm e 675W x 2 su 2 ohm. Ingressi RCA e XLR. Costruzione simmetrica per i cinque canali con cinque trasformatori toroidali di alimentazione. Trigger 12V.
GENERAL | ||
Inputs | 5 Single-Ended, 5 Balanced, 1 Relay Trigger (3.5 mm Mono Jack) | |
Outputs | 5 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5 mm Mono Jack) | |
THD+N (225 W into 8 Ω) | 0.0007% at 1 kHz, 0.008% at 20 kHz | |
IMD | 0.00019% (CCIF, 325 W into 8 Ω) | |
POWER BANDWIDTH | 10 Hz to 150 kHz (+0 -3 dB, 325 W into 8 Ω) |
|
FREQUENCY RESPONSE | 20 Hz to 20 kHz (+0 -0.15 dB), 5 Hz to 100 kHz (+0 -2 dB) |
|
INPUT SENSITIVITY (RCA and XLR 0 dB inputs) | 1 Vrms in for 28.3 Vrms out (100 W into 8 Ω) |
|
INPUT IMPEDANCE | 18 kΩ (RCA), 22 kΩ (XLR) | |
DAMPING FACTOR | >600 at 20 Hz, 400 at 1 kHz (ref. 8 Ω) | |
S/N RATIO | 125 dB, A-weighted (ref. 325 W) | |
CROSSTALK (between any two channels) | -140 dB (20 Hz), -80 dB (20 kHz) | |
VOLTAGE GAIN | 29 dB | |
SLEW RATE | 40 V/µs |
SWITCHESFront PanelPower (On/Off)Rear PanelOn/Off Modes (Trigger, Manual, Auto), Inputs (RCA, XLR, XLR -6dB)POWER OUTPUT
(Per channel, continuous RMS, 20 Hz to 20 kHz, <0.1% THD, one or all channels driven.)
Impedance | 8Ω | 4Ω | 2Ω | |||
# of Channels Driven | 1 | All | 1 | All | 1 | All |
325 W | 325 W | 500 W | 500 W | 675 W | 675 W |
Statement P2 and P5 amplifiers are stable into any impedance down to a short circuit at full output.POWER REQUIREMENTSSUPPLY VOLTAGE105 to 130 V, 60 HzPOWER CONSUMPTION2 x 1800 WDIMENSIONSHeight9-3/8 inches (23.8 cm) including feetWidthFaceplate 19-1/4 inches (49 cm)
Chassis 17-1/4 inches (43.8 cm)Depth22-1/2 inches (57.2 cm) including handlesWeight (unpacked)130 lb (59 kg)
Non ci sono video per questo prodotto.