Descrizione
Amplificatore integrato a stato solido. Potenza 200W x 2 su 8ohm, 400W x 2 su 4ohm e 550W x 2 su 2 ohm. DAC interno. Ingresso USB 32bit/384KHz e DSD 2.8/5.6MHz. Ingressi SPDIF coassiale e ottico e bilanciato XLR AES EBU. Display grafico multifunzione frontale. Stadio phono MM/MC. Sistema proprietario di correzione della risposta ambientale ARC. Controllabile tramite IP e RS-232. Trasformatore toroidale. Telecomando.
| PHONO PREAMPLIFIER The phono preamplifier is suitable for moving magnet and high-output moving coil cartridges |
||
| Input Impedance | 100 Ω (MC), 47 kΩ (MM) | |
| Input Capacitance | 270 pF (MM) | |
| Maximum Input (at 1 kHz for <0.1% THD 20 Hz – 20 kHz) | 3.6 mV (MC), 37.7 mV (MM) | |
| Gain (default at 1 kHz, user adjustable ± 20 dB) | 55 dB (MC), 35 dB (MM) | |
| RIAA Response | ± 0.1 dB (20 Hz to 20 kHz) | |
| THD+N (at 1 kHz, 20 Hz – 20 kHz BW, 2 Vrms output) | 0.008% (MC), 0.005% (MM) | |
| S/N Ratio (at 1 kHz, IEC-A, 2 Vrms output) | 82 dB (MC), 96 dB (MM) | |
| PREAMPLIFIER | ||
| Frequency Response | ||
| digital-in, 192 kHz | 10 Hz – 50 kHz (+0.00, -0.50 dB) | |
| digital-in, 96 kHz | 10 Hz – 45 kHz (+0.00, -0.50 dB) | |
| digital-in, 44.1 kHz | 10 Hz – 20 kHz (+0.00, -0.03 dB) | |
| analog-in, DSP mode | 10 Hz – 40 kHz (+0.02, -0.20 dB) | |
| analog-in, direct mode | 10 Hz – 80 kHz (+0.00, -0.10 dB) | |
| THD+N (at 1 kHz, 20 Hz – 20 kHz BW, 2 Vrms output) | ||
| digital-in, 44.1 kHz, 0 dBFS | 0.0008% | |
| analog-in, DSP mode, 1 Vrms input | 0.001% | |
| analog-in, direct mode, 1 Vrms input | 0.0020% | |
| SNR (at 1 kHz, IEC-A, 2 Vrms output) | ||
| digital-in, 44.1 kHz, 0 dBFS | 112 dB | |
| analog-in, DSP mode, 2 Vrms input | 110 dB | |
| analog-in, direct mode, 2 Vrms input | 120 dB | |
| Maximum Output (<0.1% THD) | 2.2 Vrms except analog-direct 3.3 Vrms | |
| XLR Configuration | Pin 1: Ground, Pin 2: Normal, Pin 3: Inverted | |
| POWER AMPLIFIER | ||||||||||
|
||||||||||
| THD (100 W) | 0.002% (1 kHz), 0.015% (20 kHz) | |||||||||
| IMD (100 W) | ||||||||||
| ITU-R (19 kHz + 20 kHz) | 0.0007% | |||||||||
| SMPTE (60 Hz + 7 kHz) | 0.005% | |||||||||
| SNR (IEC-A, ref. 200 W) | 114 dB | |||||||||
| Frequency Response (20 Hz – 20 kHz) | ± 0.1 dB | |||||||||
| Power Bandwidth (-3 dB at 200 W into 8 ohms) | 80 kHz | |||||||||
| Slew Rate | 30 V/μs | |||||||||
| Damping Factor (20 Hz – 1 kHz) | 330 | |||||||||
| Channel Separation | 101 dB (100 Hz), 61 dB (10 kHz) | |||||||||
| POWER REQUIREMENT | ||||||||||
| 120 V version: | In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz. | |||||||||
| 220-240 V version: | In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz. | |||||||||
| POWER CONSUMPTION | ||||||||||
| Standby | 0.38 W (120V), 0.45 W (240V) | |||||||||
| Standby + Network | 1.1 W (120V), 1.2 W (240V) | |||||||||
| Idle | 40 W | |||||||||
| Typical Use | 250 W | |||||||||
| High Output | 500 W | |||||||||
| DIMENSIONS | ||
| Height | 6-3/4” (17.2 cm) | |
| Width | 17” (43.2 cm) | |
| Depth (not including power cord) | 17-1/2” (44.5 cm) | |
| Weight (unpacked) | 40 lb (18 kg) | |
